Knowledge Center

View Categories

Raspberry Pi Pico – About

Table of Contents
Raspberry Pi Pico ARM microcontroller RP2040 micro-usb

Raspberry Pi Pico is the first product built on silicon designed in-house at Raspberry Pi (“Raspberry Silicon”). At its heart is RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options. This is paired with 2MB of on-board QSPI Flash memory for code and data storage.

The board is programmable in MicroPython or C/C++, can be flashed using mass storage over USB, and has a wide input voltage range (~1.8 to 5.5V).

Note: The Raspberry Pi Pico is a completely different board than what you are used to from Raspberry Pi. This is a micro-controller, where the other boards are micro-computers.

Specification #

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 26x multi-function GPIO pins
  • 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8x Programmable I/O (PIO) state machines for custom peripheral support
  • Dimensions: 21mm(W) x 51.3mm(L) x 3.9mm(H)

Pinout #

Raspberry Pi Pico ARM microcontroller pinout

Datasheet #

Icoon

RP2040 datasheet (raspberry pi).pdf #

1 bestand(en) 5.09 MB
Downloaden

Fritzing model #

Icoon

Raspberry-Pi-Pico-tht.fzpz #

1 bestand(en) 23.23 KB
Downloaden
Icoon

PicoH-Fritzing-THT.fzpz #

1 bestand(en) 47.05 KB
Downloaden

Source: https://forum.fritzing.org/t/looking-for-raspberry-pi-pico-part/11915/18

Products #