2.4GHz Transceiver module mini 1.27mm pin pitch NRF24L01

Beschrijving

Let op: 1.27mm pin pitch.

Informatie (ENG)

Description:

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications
125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs
Low power consumption: When working in answer mode, rapid air transport and the start-up time, which greatly reduces the current consumption.
Built-in 2.4Ghz antenna

–  The real GFSK monolithic transceiver chip
–  Built-in hardware and link layer
–  Automatic response and automatic retransmission function
–  Address and CRC check function
–  Channel switching time is very short, can be used for frequency hopping-  Fully compatible with nRF24XX series
–  The global open ISM frequency band, the maximum 0dbm transmitted power, free license to use.

Specification:
– 2Mbit / s 1Mbit / s 250Kbit / s transfer rate options
– MultiCeiver hardware to provide the 6 receiver functions at the same time
– +/- 60 ppm crystal
– Only need an external inductance when match antenna
– No multi-layer PCB
– 5V input tolerance level
– No need external level converter
– Improved ShockBurst and serial interface can be easily connected with a variety of low-cost MCU
– No MCU with SPI Interface
– The 2Mbit/s rate when the peak current 12.5mA received
– The 2Mbit/s rate @ 0dBm output current of 11mA peak
– 400nA Power-down mode, power consumption
– Power consumption of 32uA in standby mode
– 130us fast switching and wake-up time
– With on-chip voltage regulator oltage regulators
– In the 1.9 to 3.6V low voltage operation
– Possible to reduce noise

Application:
– mouse
– keyboard
– wireless headsets
– intelligent sports equipment
– remote controls
– voice applications
– security devices
– VOIP applications

Extra informatie

Gewicht	1 g
Afmetingen	2 × 3 × 1 mm

Please login to post questions