Diode battery isolator 160A 3 connections DB160-3C
€ 119,79 incl. BTW
- Beschrijving
- Extra informatie
- Q & A
Beschrijving
Attentie: getoonde foto is een voorbeeld
Dit is een 2e KANS artikel/product, en is getest op werking/functionaliteit!
— GARANTIE 14 dagen na aankoop —
Battery Combiner Schottky Diode to guarantee continuous DC power diode battery combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not nterrupt power to the critical load. The iesy battery combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45V.
Application
With “Emergency” consumers who cannot without voltage or without a short voltage drop, for example at the start of the engine. So whenever sufficient voltage is needed on the consumers. This one does not need ”the hand switch” between 2 or 3 batteries. The total battery capacity is the sum of all the batteries which are connected. Examples consumers: VHF marine radio, navigation, on board computer, emergency equipment and an electronic engine control system.
The Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together.
The battery isolator can be used for example in boat’s, recreation vehicle’s, trucks etc. where beside a starter battery also one or two accessory batteries are present. Discharging the accessory battery for example will not result in also discharging the starter battery. The iesy battery isolators feature a low voltage drop thanks to the use of high efficiency Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator; this compensates the voltage drop from the diodes inside the isolator at the output.
Note: Simply inserting the battery isolator in the cabling (current circuit) between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and the age of batteries will be shorten.
DB met compensatiediode | DB90-3C | DB120-3C | DB160-3C |
Max. laadstroom (A) | 70 | 100 | 130 |
Max. dynamo stroom (A) | 90 | 120 | 160 |
Aantal accu’s | 3 | 3 | 3 |
Kabel aansluiting | M8 | M8 | M8 |
Aansluiting diode | M4 | M4 | M4 |
Gewicht | 1,2 kg | 1,2 kg | 1.5 kg |
Afmetingen HxBxL (mm) | 60x120x80 | 60x120x100 | 60x120x100 |
Extra informatie
Gewicht | 1000 g |
---|---|
Afmetingen | 120 × 200 × 60 cm |