Beschrijving

ArduinoIDE: ESP32-C3 DEV module

PlatformIO: seeed_xiao_esp32c3

Description:

ESP32C3SuperMini is an IoT mini development board based on the Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip. ESP32-C3 is a 32-bit RISC-V CPU, including FPU (Floating Point Unit), which can perform 32-bit single-precision operations and has powerful computing capabilities. It has excellent RF performance and supports IEEE 802.11 b/g/n WiFi and Bluetooth 5 (LE) protocols. The board comes with an external antenna to enhance signal strength for wireless applications. It also has a small form factor combined with a single-sided surface mount design. It is equipped with rich interfaces, with 11 digital I/Os that can be used as PWM pins and 4 analog I/Os that can be used as ADC pins. It supports four serial interfaces including UART, I2C and SPI. Also on the board is a small reset button and a bootloader mode button.Based on the above features, ESP32C3SuperMini is positioned as a high-performance, low-power, and cost-effective IoT mini development board, suitable for low-power IoT applications and wireless wearable applications.

Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor running at up to 160 MHz
WiFi: 802.11b/g/n protocol, 2.4GhHz, support Station mode, SoftAP mode, SoftAP+Station mode, mixed mode
Bluetooth: Bluetooth 5.0
Ultra-low power consumption: deep sleep power consumption is about 43μA
Abundant board resources: 400KB SRAM, 384KB ROM built-in 4Mflash.
Chip model: ESP32C3FN4
Ultra-Small Size: As small as your thumb (22.52x18mm)
Classic form factor for wearables and small projects
Robust Security Features: Cryptographic hardware accelerators supporting AES-128/256, hashing, RSA, HMAC, digital signatures and secure boot
Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC
Single-sided component, surface mount design
Onboard LED blue light: GPIO8 pin