ESP8266 WiFi module ESP-100
ESP8266 WiFi module (ESP-100) achterkant en pinout
ESP8266 WiFi module ESP-100
ESP8266 WiFi module (ESP-100) achterkant en pinout

ESP8266 WiFi module ESP-100

€ 4,15 incl. BTW

Availability: 9 op voorraad Artikelnummer: MOD-2146-E100 Categorie: Tags: , , ,
Vergelijken

Beschrijving

ESP8266 ESP-100 Serial Wireless WIFI Module. De ESP8266 is een SoC (system on a chip) en kan daardoor zelfstandig werken en worden voorzien custom firmware zoals NodeMCU, let op dat het signaalniveau 3,3V is!

 
More big Flash, 8M Flash bytes
More strong function, able to run LWIP protocol
Support 3 modes: AP, STA, AP+STA

 
The module is set to 9600 baud.
CH_PD must be connected to 3.3V and GPIO15 to GND.
The commands must be sent with CR   LF
 
Corresponding Interface:
– SDIO 2.0, SPI, UART
– 32-pin QFN package
– Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
– Integrated RISC processor, on-chip memory and external memory interfaces
– Integrated MAC/baseband processors
– Quality of Service management
– I2S interface for high fidelity audio applications
– On-chip low-dropout linear regulators for all internal supplies
– Proprietary spurious-free clock generation architecture
– Integrated WEP, TKIP, AES, and WAPI engines
 
Specificaties:
– 802.11 b/g/n
– Wi-Fi Direct (P2P), soft-AP
– Integrated TCP/IP protocol stack
– Integrated TR switch, balun, LNA, power amplifier and matching network
– Integrated PLLs, regulators, DCXO and power management units
– 19.5dBm output power in 802.11b mode
– Power down leakage current of <10uA
– Integrated low power 32-bit CPU could be used as application processor
– SDIO 1.1/2.0, SPI, UART
– STBC, 1×1 MIMO, 2×1 MIMO
– extra I/O and SPI pin interfaces – MTDO, MTDI, SD_3, MTMS, MTCK, SD_2
– A-MPDU & A-MSDU aggregation & 0.4ms guard interval
– Wake up and transmit packets in < 2ms
– Standby power consumption of < 1.0mW (DTIM3)

Extra informatie

Gewicht 1,5 g
Afmetingen 2,4 × 1,6 × 0,4 cm
Please login to post questions