- Beschrijving
- Extra informatie
- Q & A
Beschrijving
ESP8266 ESP-12E Serial Wireless WIFI Module. De ESP8266 is een SoC (system on a chip) en kan daardoor zelfstandig werken en worden voorzien custom firmware zoals NodeMCU, let op dat het signaalniveau 3,3V is!
The module is set to 9600 baud.
CH_PD must be connected to 3.3V and GPIO15 to GND.
The commands must be sent with CR LF
Corresponding Interface:
– SDIO 2.0, SPI, UART
– 32-pin QFN package
– Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
– Integrated RISC processor, on-chip memory and external memory interfaces
– Integrated MAC/baseband processors
– Quality of Service management
– I2S interface for high fidelity audio applications
– On-chip low-dropout linear regulators for all internal supplies
– Proprietary spurious-free clock generation architecture
– Integrated WEP, TKIP, AES, and WAPI engines
Specificaties:
– 802.11 b/g/n
– Wi-Fi Direct (P2P), soft-AP
– Integrated TCP/IP protocol stack
– Integrated TR switch, balun, LNA, power amplifier and matching network
– Integrated PLLs, regulators, DCXO and power management units
– 19.5dBm output power in 802.11b mode
– Power down leakage current of <10uA
– Integrated low power 32-bit CPU could be used as application processor
– SDIO 1.1/2.0, SPI, UART
– STBC, 1×1 MIMO, 2×1 MIMO
– extra I/O and SPI pin interfaces – MTDO, MTDI, SD_3, MTMS, MTCK, SD_2
– A-MPDU & A-MSDU aggregation & 0.4ms guard interval
– Wake up and transmit packets in < 2ms
– Standby power consumption of < 1.0mW (DTIM3)
Extra informatie
| Gewicht | 100 g |
|---|---|
| Afmetingen | 2,4 × 1,6 × 0,4 mm |
Please login to post questions
/magnetische-sensor-module-hall-effect-bovenkant.jpg)
/magnetische-sensor-module-hall-effect-onderkant-200x200.jpg)
/lichtintensiteit-sensor-bh1750-gy-302-bovenkant-200x200.jpg)
/lichtintensiteit-sensor-bh1750-gy-302-onderkant-200x200.jpg)
