Stroommeter module 3-36VDC 3A analoog MAX471

 3,57 incl. BTW

Availability: 3 op voorraad SKU: SEN-2075-MAX47 Categorie: Tags: , , , , ,


Een stroommeter module op basis van de MAX471 chip. Met deze sensor kun je alleen gelijkstroom meten tot maximaal 3A (analoog 1 volt per 1 ampere)
Informatie (eng)
The MAX471/MAX472 are complete, bidirectional, high-side current-sense amplifiers for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since it does not interfere with the ground paths of the battery chargers or monitors often found in “smart” batteries.
The MAX471 has an internal 35m Ohm current-sense resistor and measures battery currents up to ±3A. For applications requiring higher current or increased flexibility, the MAX472 functions with external sense and gain-setting resistors. Both devices have a current output that can be converted to a ground-referred voltage with a single resistor, allowing a wide range of battery voltages and currents.
An open-collector SIGN output indicates current-flow direction, so the user can monitor whether a battery is being charged or discharged. Both devices operate from 3V to 36V, draw less than 100µA over temperature, and include a 18µA max shutdown mode. MAX471, MAX472: Typical Operating Circuit MAX471, MAX472: Typical Operating Circuit Enlarge+
Key Features
Complete High-Side Current Sensing
Precision Internal Sense Resistor (MAX471)
2% Accuracy Over Temperature
Monitors Both Charge and Discharge
3A Sense Capability with Internal Sense Resistor (MAX471)
Higher Current-Sense Capability with External Sense Resistor (MAX472)
100µA Max Supply Current
18µA Max Shutdown Mode
3V to 36V Supply Operation
Battery-Powered Applications
Cell Phones
Energy Management
Portable PCs: Notebooks, Subnotebooks, Palmtops
Portable Phones
Portable Test/Measurement Systems
Smart Battery Packs/Chargers

Extra informatie

Gewicht 4 g
Afmetingen 2,5 × 2 × 1,5 mm

Please login to post questions