Temperatuur Luchtvochtigheid sensor I2C HTU21D

Beschrijving

Ps. Kleur van de PCB kan afwijken van getoonde foto

Informatie (ENG):

Description:

• The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor.This sensor is ideal for environmental sensing and data logging and perfect for a weather stations or humidor control systems.All you need is two lines for I2C communication and you’ll have relative humidity readings and very accurate temperature readings as a bonus!
• There are only four pins that need to be hooked up in order to start using this sensor in a project.One for VCC, one for GND, and two data lines for I2C communication. This breakout board has built in 4.7k pull up resistors for I2C communications.If you’re hooking up multiple I2C devices on the same bus, you may want to disable these resistors. 
• Power Supply: 1.5V-3.6V
• Maximum power consumption: 2.7uW
• Humidity accuracy range (10% RH to 95% RH): HTU21D ± 2% RH Humidity Hysteresis: ± 1% RH

Performance

• Covers full humidity range of 0 to 100% RH
• Broad temperature range of -40°C to 125°C
• Use output data to calculate absolute humidity and dew point
• Quick recovery from condensation – 10 seconds
• Fast response time to humidity changes – 5 seconds typical
• Fully calibrated and interchangeable
• Recovers fully from condensation
• Fast digital conversion time – 14 mS typical 

Extra informatie

Gewicht	40 g
Afmetingen	1,5 × 1,5 × 0,5 mm
Voltage (V)	1.5V-3.6V
Interface	I2C
Analoog / Digitaal	Digitaal

Please login to post questions