USB-PD Sink Controller CH224K SOP-8

Beschrijving

Nowadays USB PD (Power Delivery) is the standard on most modern consumer products. This enables users to use a single power adaptor across various products making it much more economic. CH224K from WCH is an easy-to-use low-cost solution for integrating USB PD into developing products. It offers easy configuration and cost-effective design. CH224K is a PD source controller that will communicate with PD sources such as PD charges and negotiate the necessary power output up to 20V 5A. It supports PD3.0/2.0, BC1.2 and other boost fast charging protocols. It also supports the automatic detection of VCONN and analog E-Mark chips, with a maximum power of 100W. It also has features such as built-in PD communication module output voltage detection, over-temperature protection and over-voltage protection.

CH224K Pinout Configuration

Pin Number	Pin Name	Type	Description
0	GND	Power	Common Ground
1	VDD	Power	Power Input
4,5	DP, DM	Communication	USB Pins
6,7	CC1, CC2	Communication	Type-C CC Pins
2,3,9	CFG1, CFG2,	Configuration	Configuration Pins
CFG3
8	VBUS	Sense Input	Voltage sense input
10	PG	Output	Power Good Pin

Note: The Complete Technical Details can be found in the CH224K datasheet given at the end of this page.

Equivalent for CH224K: CH224D

Alternatives for CH224K: CH221K, IP2721

Features

• Supports 4V to 22V input voltage
• Support PD3.0/2.0, BC1.2 and other fast charging protocols
• Support USB Type-C PD, support positive and negative insertion detection and automatic switching
• Support E-Mark simulation, automatically detect VCONN, support PD request of 100W power
• The requested voltage can be dynamically adjusted through several methods
• High single-chip integration, simplified peripherals, and low cost
• Built-in overvoltage protection module, overtemperature protection module

Extra informatie

Gewicht	0,5 g
Afmetingen	1 × 1 × 0,5 mm

Please login to post questions