Voet Schakelaar 1xNO SPDT 10A 250VAC terugverend zwart TFS-1

Beschrijving

Specification:
Model: TFS – 01
Color: black
Wiring Length: 1 m / 3.3 ft, 2 m / 6.6 ft (optional)
Working Voltage: 250VAC
Rated voltage: 250(VAC)
Rated current:10(A)
Contact form: one ON and one OFF
Shell material: plastic shell
Scope of application: control
Foot switch pedal size: 100 x 60 x 33 mm / 3.9 x 2.4 x 1.3 inches
Contact resistance: below 50mΩ(first time)
Insulation resistance: 100MΩ above, 500 VDC test
Average resistance voltage: 2000V AC, 1 minute time
Mechanical life: 100,000 times
Electrical life: 100,000 times
Ambient temperature: -210°C ~ + 700°C (no condensation dew, no icing)
Ambient humidity: 45%~85%RH

DURABLE:

foot pedal switch adopts double silicone rubber gasket, makes waterproof quality can reach IP67, thus guarantees high reliability and safety, adopts limit switch action to realize high reliability

APPLICATION:

Pedal foot controller is suitable for table drills, instrument machine tools, power machines, shearing machines, hydraulic presses, medical devices, etc., which are widely used in your work and life

FUNCTION:

250VAC foot pedal is used for regularly switching on and off on-load circuits, mainly used to control the reverse, direct and stop operation of the motor in the control loop. It can also be used for the direct control of the small motor in the main loop

FEATURES:

The limiter adopts adjustable mechanical memory structure with reliable performance and high sensitivity, offers you a better using experience

ANTI-SLIP:

The non-slip design of the pedal makes the operation more effective, convenient and safer, ideal choice for use and replacement

Note:
1. Pay attention to the rated load of the product according to the nature of the load and the current value.
2. When handling and moving, pay attention to short circuit in the internal wiring, breakage and so on.
3. Use in a large number of water, oil, dust and other places should pay attention to the level of protection.
4. Heavy pressure and impact are the direct causes of damage, be careful.
5. When adjusted for direct control of a small motor in the main loop, the front of the power supply must be equipped with a fuse and an insulation switch. Since this switch has a phase power supply directly in the motor, the overhaul must be cut off from the insulation switch to ensure personal safety.