![Display TFT 1.8" 128x160 SPI ST7735S met pin headers onder](https://domoticx.net/wp-content/uploads/catalog/module/Display TFT 1.8 128x160 SPI ST7735S/display-tft-1.8-128x160-spi-st7735s-01.jpg "Display TFT 1.8" 128x160 SPI ST7735S met pin headers onder")
- Beschrijving
- Extra informatie
- Q & A
Beschrijving
Let op, veelal worden 5 weerstanden van 1Kohm toegepast omdat de aansturing van het TFT display 3.3V is in plaats van 5V, anders krijgt men hele rare strepen en licht op het display!
Specificaties (ENG):
|
SIZE |
1.8inch |
|
Display Mode |
a-TFT |
|
Display Format |
Graphic 128RGB*160 Dot-matrix |
|
Input Data |
SPI interface |
|
Drive IC |
ST7735S |
|
Dimensional outline |
35(W)*56 (H)*3.45+/-0.1(T)mm |
|
Resolution |
128RGB*160 Dots |
|
LCD Active area |
28.03 (W)*35.04 (H) |
|
Pixel size |
0.219(W)*0.219(H) |
|
Viewing Direction |
12 o’clock |
|
Operating Temperature |
-20～70°C
|
|
Weight |
9.6 |
2.Pin Descriptions：
|
PIN No |
Symbol |
Description |
|
1 |
GND |
Ground |
|
2 |
VCC |
Power 3.3V |
|
3 |
SCL |
Serial clock pin. |
|
4 |
SDA |
Serial data input |
|
5 |
RES |
LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. |
|
6 |
DC |
Data/Command Control |
|
7 |
CS |
Chip Select |
|
8 |
BLK |
Backlight control pin |
Extra informatie
| Gewicht | 100 g |
|---|---|
| Afmetingen | 7 × 5 × 1,5 mm |
