Modbus RS485 RTU D/A converter voor 4-20mA uitgang signaal 12-25VDC JST-XH 2P 2.54mm pitch connector N4IOA01

Beschrijving

JST-XH 2-pin male tbv connector kan onder gekozen worden!

N4IOA01 12V 24V one Channel PWM to DAC /RS485 to 4-20MA Module

Feature:

1: Operating Voltage : DC 12 (DC 12-25V), recommended power supply with small ripple

2: Operating Current : 12-32MA(Related to the output current)

3: MODBUS RTU Command support 03 06 function code

4: The output current range is 0.50-21.00MA (for 4-20MA) and the maximum output current capability is 21MA.

5: Current resolution is 0.01MA, output accuracy is 1%; if the error is greater than 1%, it can be calibrated

6 :MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter;

7 :Under the MODBUS command mode, it can support up to 247 devices in parallel

8: The current output terminal open circuit (no load) output voltage is 10V

Application

4-20MA/0-20MA Sensor

0-20MA/4-20MA Current Signal generator

Automated industry PLC

Smart Home,Home Automation ;

Identification system;

RS485 Remote monitoring;

Multimeter voltmeter