- Beschrijving
- Extra informatie
- Q & A
Beschrijving
Dit is een 2e KANS/Vintage artikel/product, en is getest op werking/functionaliteit! — GARANTIE 14 dagen na aankoop — |
The adapter is a perfect solution for a PCI to Serial ATA controller and PATA controller. It includes two independent Serial ATA channels and single PATA channel. Each SATA channel has its own Serial ATA bus and will support one Serial ATA device. The SATA support a 32-bit 66 MHz PCI bus and the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s). The PATA channel support two enhanced IDE devices. Any system (IBM or Compatible PC) with a PCI bus interface can simply add the Serial ATA and PATA interfaces by adding the adapter and loading the
driver into the system. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for full exploiting the functions of this product.
Features
Designed for versatility and performance, the adapter provides the following:
- Support RAID Level 0, RAID Level 1 and JBOD
- Dual channel master mode PCI supporting up to two SATA devices
- Support data transfer rates of up to 150Mbps per SATA channel
- Comply with Serial ATA Specification Revision 1.0
- Support UltraATA-133/IDE interface
- Support ATA PIO mode4, multi-word DMA-mode 2drivers and UltraDMA-mode6
- Extension to UltraDMA-133 interface for up to 133MB/Sec transfer rate
- Comply with ATA/ATAPI-6
- Support PCI 2X mode
- Support PCI native modes
- Comply with PCI Local Bus Specification Revision 2.2
- Easy to configure and use
1.2 Environmental - Storage Temperature: -40oC ~70oC
- Operating Temperature : 0oC ~40oC
- Storage Humidity: 5% ~90% RH Non-condensing
- Operating Humidity: 10% ~90% RH Non-condensing
Extra informatie
Gewicht | 100 g |
---|---|
Afmetingen | 11 × 12 × 1,5 mm |
Aansluitingen | |
Chip | |
Fabrikant onderdeel nr. | |
Interface | |
Data snelheid (Mbit/s) | |
Slotbreedte |