Raspberry Pi Pico ARM microcontroller RP2040 micro-usb (no WiFi)

Beschrijving

Wordt geleverd met 2x 1×20 en 1×3 male headerpins

Raspberry Pi Pico is the first product built on silicon designed in-house at Raspberry Pi (“Raspberry Silicon”). At its heart is RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options. This is paired with 2MB of on-board QSPI Flash memory for code and data storage.

The board is programmable in MicroPython or C/C++, can be flashed using mass storage over USB, and has a wide input voltage range (~1.8 to 5.5V).

Note: The Raspberry Pi Pico is a completely different board than what you are used to from Raspberry Pi. This is a micro-controller, where the other boards are micro-computers.

Specifications

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26x multi-function GPIO pins
• 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8x Programmable I/O (PIO) state machines for custom peripheral support
• Dimensions: 21mm(W) x 51.3mm(L) x 3.9mm(H)